|
|
Exclusive
Fiero
Parts That You Helped Us Develop
We recognize that our prices are not always lower than your local auto parts store.
However, we hope that the list of exclusive Fiero parts and accessories below gives you confidence that your hard earned dollars are being reinvested back into the Fiero community so that you and others will be able to enjoy the Fiero for many years to come.
We think it is safe to say that your local auto parts store will not provide you with a more extensive list of exclusive parts they have developed to keep your Fiero on the road.
ABS Plastic Rear Wall Panel w/ speakers
We are currently in the beginning steps of producing an ABS plastic rear wall panel (behind your seats) that will accept a pair of speakers. The panel will be both paintable and carpetable.
Notchback Trunk Seal
Reproduction trunk seal to fit 1984 - 1988 Notchback style cars.
Notchback Quarter Windows
Replacement panels to insert in the factory quarter window frame. We are also making panels that will completely replace your quarter window frame.
Center Wheel Caps
Reproduction center wheel caps with and without logo
GT/SE Aero Front Air Dam
New urethane replacement air dam for the GT style front fasica.
84-88 Battery Support
Reproduction battery support to replace the discontinued original.
86-88 GT Trunk Lock Retainer Bracket
Stainless steel reproduction bracket that holds the trunk lock cylinder on 86-88 GT models.
85-88 V6 Upper Intake Plenum Gaskets
These gaskets will allow removal of just the uppper plenum without purchasing a complete intake gasket set.
87-88 Top Headlamp motor gasket
V6 Kickdown Cables
Stock replacement kickdown (detent) cable for V6 Automatic Fieros.
86-88 GT Decklid Weatherstrip
Cost effective aftermarket replacement weatherstrip for the decklid on 86-88 GT models.
85-88 5spd Back-up Light Switch
Stock replacement for the discontinued original switch mounted on the 5spd transmission.
84-86 Headlamp Isolation Relay
Stock replacement for the discontinued original. Mounts on the left side inner fender.
Front Cowl Seal
Stock replacement seals that fit on the windshield cowl
84-88 Ft Upper Cross-Member Brackets
New brackets to replace the commonly rusted units that bolt the top of the front cross-member to the chassis
Front & Rear Windshield Molding
Replacement molding that fills the gap around the front and rear windshields.
Accelerator Pedals
Aftermarket reproduction accelerator pedals.
Sunroof Sunshade Storage Bag
Reproduction of the GM storage bag that held the sunroof glass and/or sunroof sunshade.
V6 EGR Spacer Gasket
Stock replacement gasket for the discontinued unit that fits between the V6 crossover pipe and the EGR spacer block.
87-88 Headlight Motor Cover Gasket
Replacement gasket that fits between the headlight motor and side cover. This gasket may be needed when rebuilding your headlight motor.
85-88 4cyl Adjustable Shift & Selector Cables
Aftermarket replacement cables for 85-88 4cyl 5spds.
Sunroof Weatherstrip Track Bolts
Replacement bolts that hold the sunroof weatherstrip tracks in place.
Seat Recline Handles
Aftermarket reproduction seat recline handles.
85-88 V6 Vacuum Lines
Reproduction mild steel vacuum lines that run under the upper intake assembly.
V6 Fuel Block Spacer & Seal
Replacement spacer/seal that fits between the V6 fuel rail and the fuel inlet block.
Additional Color Matched Interior Paint
The Fiero Store is working on 3 additional colors for the Fiero interior: Charcoal Gray, and 2 browns to match the darker portions of the dash.
Mud Flaps
Mud flaps with the word "Fiero" printed along the bottom of each flap.
86-88 GT NOS Decklid Vents
Brand new old stock vents that go on either side of the 86-88 GT decklid.
Floor Mats with "Fiero" & "Fiero GT" Embroidery
Custom fit floor mats with the word "Fiero" or "Fiero GT" embroidered on them instead of the Fiero logo.
Seat Upholstery
Factory seat upholstery has been on our mind since we had to discontinue them a few years back.
84-88 Indy/SE/GT Rocker Panels
New replacement rocker panels made with original GM tooling.
1988 Beechwood Interior Spray Paint
Color matched paint for the 1988 beechwood color interior panels.
85-88 NOS Izusu 5spd Transmissions
Brand new old stock GM 5spd Izusu transmissions for the 4cyl Fieros.
Inner Door Glass Seals
Aftermarket reproductions of the discontinued GM originals. This straight rubber seal rubs against the window at the top of the door frame. Due to arrive in September.
Outer Door Glass Seals
Aftermarket reproductions of the discontinued GM originals. This straight seal has a rubber lip that rubs against the window at the top of the door frame. Due to arrive July 25th.
Power Window Switches
Aftermarket reproductions of the discontinued GM originals.
84-86 Headlamp Motor Gears
Stock replacement gears that fit inside the headlamp motors and often break.
ABS Non-Sunroof Headliners
Replacement non-sunroof headliners made from ABS plastic pre-covered with material and ready to install.
Color Matched Interior Trim Paint
Custom mixed interior spray paint for use on interior panels. These paints will be as close as possible to the factory dyed plastic components in the Fiero interior.
84-88 Horn Switch
Aftermarket replacement horn switches for 4-spoke steering wheels.
ABS Plastic Headliners with Sunroof
Replacement headliners made from ABS plastic pre-covered with material and ready to install.
87-88 Headlamp Motor Gears
Stock replacement gears that fit inside the headlamp motors and often break.
85-88 V6 Spark Plug Wire Shields
Aftermarket replacement spark plug wire shield that fits over the end of the V6 spark plug wires.
87-88 4cyl Steel Braided Fuel Feed and Return Lines
Stainless steel braided lines that run to and from the throttle body on 87-88 4cylinder Fieros
Custom Fiero Fender Mats
Fender mats to protect your paint while working on yours Fiero. Custom printed with the Fiero logo and name.
Headlight Switch Backing Plate
Aftermarket replacement plate that fits around the headlight and dimmer switch.
84-87 Grooved Side Marker Lamps
Aftermarket replacement grooved side marker lamps for 84-87 Fieros.
84-88 Trunk Lamp
Aftermarket replacement lamp that fits in the rear trunk.
V6 Coolant Tubes
Reproduction left and right side coolant tubes for 85-87 V6 models. These tubes run under the car on each side.
84-88 Notchback Quarter Window Clip
Plastic replacement clip that fits on the back edge of the notchback quarter windows.
Plastic Sunroof Clip (on body)
This plastic clip fits on the front edge of the sunroof opening. Fits around the front sunroof tab slots on the body.
85-88 V6 Exhaust Studs
Replacement studs that hold the exhaust manifolds to the cylinder heads.
86-88 V6 5spd Slave/Shift Cable Bracket
Reproduction aluminum slave cylinder / shift cable bracket that mounts the slave / cable to the transmission. Manufactured with the original GM tooling.
85-87 4cyl 5spd Clutch Arm
Aftermarket cast iron clutch arm to replace the long discontinued original.
85-88 V6 Stainless Oil Pressure Sending Unit Tube
Stainless steel oil pressure sending unit tube. This tube runs from the oil filter location up the front of the motor.
84-86 4spd Back-up Light Switch
Aftermarket replacement back-up light switch that fits in the center console on 4spd models.
84-88 Sunroof Tabs
Aftermarket replacement sunroof tabs/hinges for the front of the factory sunroof glass.
V6 Stainless Steel Ocelot Exhaust
Performance Ocelot exhaust made from T-409 stainless steel for all 85-88 V6 models.
85-88 V6 Braided Flexible EGR Tube
Steel braided EGR tube to replace the expensive 85-87 GM original and the discontinued 1988 tube.
Emergency Warning Switch
Aftermarket replacement for the discontinued e-brake warning switch. Mounts to the e-brake handle.
84-87 Front Brake Rotor Dust Shields
Aftermarket replacement shields that fit behind your rear rotors.
84-87 Rear Brake Rotor Shields
Aftermarket replacement shields that fit behind your rear rotors.
85-88 V6 Lightened Billet Steel Flywheels
Replacement flywheels that weigh less than the factory unit at a cost effective price.
Polyurethane Bump Stops
Polyurethane front bump stops for 84-88 Fieros.
Sunroof Sunshade
Reproduction of the hard to find sunshade that fits between the roof and the sunroof glass. Helps keep out damaging sun rays.
86-88 GT Trunk Light Switch
Aftermarket replacement for the long discontinued original. This switch installs on the rear decklid next to the latch.
Decklid Release Switch
Aftermarket replacement for the discontinued decklid release switch.
Pontiac Rear Fascia Emblem
Aftermarket reproduction of the chrome plastic ""pontiac"" rear fascia emblem.
Rear Defrost Switch
Aftermarket replacement for the discontinued rear window defrost switch.
Rear Trunk Carpets
Aftermarket molded replacement carpets for the rear trunk compartment.
84-86 4cyl Exhaust Headpipe
Aftermarket reproduction of the discontinued pipe that runs from the manifold to the catalytic converter.
V6 Alternator Bracket
Aftermarket reproduction of the discontinued V6 alternator bracket that commonly cracks.
84-88 Clear Front Turn Signal Lamps
Clear aftermarket versions of the original amber turn signal lamps that are located in the front bumper.
84-88 Coolant Tube Clamps
Aftermarket replacement clamps that support the coolant tubes which run on either side of the Fiero.
Fastback Rear Decklid Lock Components
Aftermarket reprodcution plastic lock cylinder cover and metal lock rod.
3rd Brake Light Housing
Aftermarket replacement for the 3rd brake light housing.
Automatic Transmission Cooler Lines
Stainless Steel reproductions of the transmission cooler lines that run from the automatic transmission to the radiator.
Cruise Control Vacuum Tank
Aftermarket replacement of the metal canister below the cruise control servo.
Front Cradle Mount Bolts
Stock replacement bolts that fit through the horizontal bushings on the front of the engine cradle.
V6 Stainless Fuel Rail Lines
Each line is CNC bent from stainless steel pipe to exact OEM specifications. These lines fit from the V6 fuel rail to the feed and return lines.
1988 V6 Crossover Pipe
Aftermarket reproduction of the discontinued GM original pipe that fits between the V6 exhaust manifolds.
85-87 V6 Crossover Pipe
Aftermarket reproduction of the discontinued GM original pipe that fits between the V6 exhaust manifolds.
86-88 GT Rear Fascia Emblem
This rounded smooth molding displays the GT logo on 86-88 rear bumpers.
Front Rubber Spring Isolators
These rubber isolators fit on the top and bottom of the front suspension springs.
Sunroof Weatherstrip Channels
These metal tracks rivet to the roof panel and hold the sunroof weatherstrip.
84-87 Steering Rack Boots
Protective boots that connect to the rack and tie rods to protect them from debris.
84-88 Fuel Tank Straps
Stainless steel replacement straps that support the fuel tank.
Door Weatherstrips
Aftermarket reproductions of the rubber weatherstrips that install around the perimeter of each door.
Strut Tower Brace
Connects both upper rear strut towers to improve handling.
V6 Chrome Intake Bolts
These bolts hold the upper intake to the middle intake.
86-88 Front Door Moldings
Aftermarket replacements for the discontinued rounded smooth GM originals.
86-88 Front Fender Moldings
Aftermarket replacements for the discontinued rounded smooth GM originals.
86-88 Rear Door Moldings
Aftermarket replacements for the discontinued rounded smooth GM originals.
86-88 Rear Quarter Panel Moldings
Aftermarket replacements for the discontinued rounded smooth GM originals.
Rear Rubber Spring Isolators
These rubber isolators fit on the top and bottom of the rear suspension springs.
R & D Center
|
|
|
|
|
|